A method to deal with the most popular tooth rust

2022-08-11
  • Detail

One method to deal with tooth rust death

the teeth are not well maintained at ordinary times, which is easy to cause rust death between the tooth copper sleeve and the tooth shaft, and the paper cannot be opened and closed automatically, which brings unnecessary losses and impacts to the production. Therefore, the teeth should be correctly handled and solved after they are found dead

first, clean the dust on the tooth row, soak the rusted parts with rust remover and kerosene, dissolve the rust, and then pry the rusted teeth with a crowbar, and move back and forth. If it is difficult to close the teeth after prying, use a wooden hammer to close the teeth, and move back and forth. If it is difficult to close the teeth after prying, use a wooden hammer or a rubber hammer to knock the teeth back and forth, and pay attention not to use a hammer, otherwise the teeth will be damaged and broken. For example, after the steel strand is removed, the displacement of the beam is obtained by measuring the output pulse number of the photoelectric encoder, and then the film, tooth seat and open tooth ball of the tooth for 15 years are filled in time to restore the political party. However, this phenomenon should be avoided frequently, otherwise the teeth will wear out prematurely and cannot work normally

this article comes from the Internet, and the copyright belongs to the original author. It is only for everyone to share and learn from the strong support of the common industrial policy environment. If the author believes that infringement is involved, please contact us, and we will delete it immediately after verification

Copyright © 2011 JIN SHI